We designed every part of this ash catcher for great function and an easy fit. The honeycomb disc creates tight bubbles for maximum filtration, while the standard 14mm joint ensures it fits many popular water pipes. Here is how each specification gives you a better session.

Choosing the right angle is crucial for making sure your ash catcher sits upright and works correctly. An incorrect angle can lead to spills or an unstable setup. Use this simple guide to find out if you need the 45° or 90° version.

Should You Choose A 45 Or 90 Degree Ash Catcher?

• Choose the 90° Ash Catcher if: Your water pipe's joint is positioned straight up, perpendicular to the floor. This is common on straight tube bongs and many dab rigs with vertical joints.
• Choose the 45° Ash Catcher if: Your water pipe's joint comes out at an angle. This is typical for most beaker bongs and pipes with angled downstems. The 45° ash catcher will correct this angle, allowing it to sit level.

To be certain, look at your bong from the side. If the joint points directly up, you need 90°. If it points out at an angle, you need 45°.

Beyond its basic function, the design of our Core Cylinder ash catcher includes features that maximize its filtering power and usefulness. Let's see how they get the job done.

How Does The Honeycomb Disc Percolator Work?

A honeycomb disc is a flat piece of glass filled with dozens of small holes. As smoke is pulled through, it is forced through these openings, breaking it up into thousands of tiny bubbles. This action greatly increases the surface area of the smoke that touches the water, resulting in quick cooling and effective filtration.

What Is The Benefit Of The Cylinder Design?

The straight, cylindrical body offers a clean look and a key functional advantage. It provides a generous water volume to submerge the percolator properly without being overly bulky. This shape also helps prevent water from splashing up into your bong, keeping your setup clean and your hits dry.

Finding the right accessory can improve your entire experience. While our Core Cylinder is a fantastic choice for diffusion, here is how it compares to other affordable options you might consider.

Proper use and regular maintenance will keep your ash catcher working perfectly. Following a few simple steps will ensure you get clean, filtered hits every time.

How Much Water Should You Put In The Ash Catcher?

Fill the ash catcher with enough water to fully submerge the honeycomb disc by about a quarter-inch. This level ensures proper filtration without adding too much drag or risking water splashing into your bong. Test it with a gentle pull before lighting to check the water level.

What Is The Best Way To Clean A Disc Perc?

Because of the small holes, disc percs need careful cleaning. First, rinse with hot water to remove loose debris. Then, fill the ash catcher with a solution of 99% isopropyl alcohol and coarse salt. Plug the openings and shake gently—avoid aggressive shaking that could damage the perc. Let it soak for 30 minutes for tough resin, then rinse thoroughly with hot water.

This ash catcher is a great start to a cleaner setup. Pair it with one of our compatible bongs. You can also stock up on proper cleaning tools to keep your entire collection in top shape. Explore our full range of accessories to find the perfect fit.

• Shop all Ash Catchers